|
|||||||||||||||||||
|
This bot's chassis was made with just 5 BuildPlates and some fasteners.
Scale Ref:
This USB connector gives you an idea of how small these parts are.
BuildPlates are 1mm thick strips of aluminium, 76mm long and 10mm wide. As viewed within the SketchUp environment, they have 3 rows of dots on each face side that serve as centre coordinates for holes and point-to-point coordinates for Cut and Bend lines. You can process BuildPlates with our Toolkit and a Drill press or send us your SketchUp file and we'll process them for you. Click here for more BuildPlate info.
Beveled screw-head locks BuildPlates tight
Slight stand-off allows BuildPlates to pivot
Beveled screw-head locks BuildPlates tight
Push-nut provides tight, permanent lock
Slight stand-off allows BuildPlates to pivot
Beveled screw-head locks BuildPlates tight
Push-nut provides tight, permanent lock
Slight stand-off allows BuildPlates to pivot
Beveled screw-head locks BuildPlates tight
Push-nut provides tight, permanent lock
Push-nuts are great for 'not to be disassembled' structures with 100+ BuildPlates i.e. architectural stuff. You can remove them from fastener posts by prying-up on the little fingers if you need to.
SM1_03 - M1.4 * 2.5mm Fastener Screw
Bevel-head screws provide a lock-fit for VSF_02's and a pivot-fit with the other lengths of VSF's.
SM1_04 - M1.4 * 3.0mm Fastener Screw
Cheese-head screws provide a lock-fit for VSF_03, VSF_04, & VSF_05 fasteners.
|
||||||||||||||||||
